LAN9730 Datasheet, PDF (127/222 Pages) SMSC Corporation – High-Speed Inter-Chip (HSIC) USB 2.0

LAN9730/LAN9730i
Bits
Description
0 Soft Reset (SRST)
Writing 1 generates a software initiated reset of the device. If an external
Ethernet PHY is used, it will be reset as well.
Note 6-4
A software reset will result in the contents of the EEPROM being reloaded.
While the reset sequence is in progress, the USB PHY will be disconnected.
After the device has been reinitialized, it will take the PHY out of the discon-
nect state and be visible to the host.
The PHY_SEL pin determines the default value.
Type
SC
Default
0b
 2012-2015 Microchip Technology Inc.
DS00001946A-page 127