SAM7X128_14 Datasheet, PDF (582/662 Pages) ATMEL Corporation – ARM-based Flash MCU

38.2 DC Characteristics
The following characteristics are applicable to the operating temperature range: T_A = -40°C to 85°C, unless otherwise specified.
Table 38-2. DC Characteristics
Symbol Parameter
Conditions
V_VDDCORE
V_VDDPLL
V_VDDIO
V_VDDFLASH
V_IL
V_IH
V_OL
V_OH
I_LEAK
I_PULLUP
DC Supply Core
DC Supply PLL
DC Supply I/Os
DC Supply Flash
Input Low-level Voltage
Input High-level Voltage
Output Low-level Voltage
Output High-level Voltage
Input Leakage Current
Input Pull-up Current
V_VDDIO from 3.0V to 3.6V
V_VDDIO from 3.0V to 3.6V
I_O = 8 mA, V_VDDIO from 3.0V to 3.6V
I_O = 0.3 mA, (CMOS) V_VDDIO from 3.0V to 3.6V
I_O = 8 mA, V_VDDIO from 3.0V to 3.6V
I_O = 0.3 mA, (CMOS) V_VDDIO from 3.0V to 3.6V
PA0-PA3, Pull-up resistors disabled
(Typ: T_A = 25°C, Max: T_A = 85°C)
Other PIOs and NRST, Pull-up resistors disabled
(Typ: T_A = 25°C, Max: T_A = 85°C)
PB27-PB30, V_VDDIO from 3.0V to 3.6V,
PAx connected to ground
Other PIOs and NRST, V_VDDIO from 3.0V to 3.6V,
PAx connected to ground
I_PULLDOWN
C_IN
I_SC
Input Pull-down Current,
(TST, ERASE, JTAGSEL)
Input Capacitance
Static Current
(SAM7X512/256/128)
V_VDDIO from 3.0V to 3.6V,
Pins connected to V_VDDIO
100 LQFP Package
On V_VDDCORE = 1.85V,
MCK = 500Hz
All inputs driven at 1
(including TMS, TDI, TCK, NRST)
Flash in standby mode
All peripherals off
T_A = 25°C
T_A = 85°C
I_O
T_SLOPE
Output Current
Supply Core Slope
PA0-PA3, V_VDDIO from 3.0V to 3.6V
PB27-PB30 and NRST, V_VDDIO from 3.0V to 3.6V
Other PIOs, V_VDDIO from 3.0V to 3.6V
Note that even during startup, V_VDDFLASH must always be superior or equal to V_VDDCORE.
Min
1.65
1.65
3.0
3.0
-0.3
2.0
V_DDIO - 0.4
V_DDIO - 0.1
10
143
135
6
Typ
40
20
20.6
321
295
12
100
Max Units
1.95
V
1.95
V
3.6
V
3.6
V
0.8
V
5.5
V
0.4
V
0.1
V
V
V
400
nA
200
nA
60
µA
600
µA
550
µA
13.9 pF
60
µA
400
16
mA
2
mA
8
mA
V/ms
Table 38-3.
Symbol
V_VDDIN
V_VDDOUT
1.8V Voltage Regulator Characteristics
Parameter
Conditions
Supply Voltage
Output Voltage
I_O = 20 mA
Min
Typ
Max Units
3.0
3.3
3.6
V
1.81
1.85
1.89
V
SAM7X Series [DATASHEET]
6120K–ATARM–11-Feb-14
582