 English |
|
|
|
|
|
|
|
| SAM7X128_14 Datasheet, PDF (384/662 Pages) ATMEL Corporation – ARM-based Flash MCU | |||
| |||
| ◁ |
32.5.11.1 WAVSEL = 00
When WAVSEL = 00, the value of TC_CV is incremented from 0 to 0xFFFF. Once 0xFFFF has been reached, the value
of TC_CV is reset. Incrementation of TC_CV starts again and the cycle continues. See Figure 32-7.
An external event trigger or a software trigger can reset the value of TC_CV. It is important to note that the trigger may
occur at any time. See Figure 32-8.
RC Compare cannot be programmed to generate a trigger in this configuration. At the same time, RC Compare can stop
the counter clock (CPCSTOP = 1 in TC_CMR) and/or disable the counter clock (CPCDIS = 1 in TC_CMR).
Figure 32-7. WAVSEL= 00 without trigger
Counter Value
0xFFFF
Counter cleared by compare match with 0xFFFF
RC
RB
RA
Waveform Examples
TIOB
Time
TIOA
Figure 32-8. WAVSEL= 00 with trigger
Counter Value
0xFFFF
RC
RB
RA
Waveform Examples
TIOB
Counter cleared by compare match with 0xFFFF
Counter cleared by trigger
Time
TIOA
SAM7X Series [DATASHEET]
6120KâATARMâ11-Feb-14
384
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese