SAM7X128_14 Datasheet, PDF (559/662 Pages) ATMEL Corporation – ARM-based Flash MCU

37.5.9 Interrupt Enable Register
Register Name:
EMAC_IER
Access Type:
Write-only
31
30
29
28
–
–
–
–
23
22
21
20
–
–
–
–
15
14
13
12
–
–
PTZ
PFR
7
6
5
TCOMP
TXERR
RLE
4
TUND
• MFD: Management Frame sent
Enable management done interrupt.
• RCOMP: Receive Complete
Enable receive complete interrupt.
• RXUBR: Receive Used Bit Read
Enable receive used bit read interrupt.
• TXUBR: Transmit Used Bit Read
Enable transmit used bit read interrupt.
• TUND: Ethernet Transmit Buffer Underrun
Enable transmit underrun interrupt.
• RLE: Retry Limit Exceeded
Enable retry limit exceeded interrupt.
• TXERR
Enable transmit buffers exhausted in mid-frame interrupt.
• TCOMP: Transmit Complete
Enable transmit complete interrupt.
• ROVR: Receive Overrun
Enable receive overrun interrupt.
• HRESP: Hresp not OK
Enable Hresp not OK interrupt.
• PFR: Pause Frame Received
Enable pause frame received interrupt.
• PTZ: Pause Time Zero
Enable pause time zero interrupt.
27
–
19
–
11
HRESP
3
TXUBR
26
–
18
–
10
ROVR
2
RXUBR
25
–
17
–
9
1
RCOMP
24
–
16
–
8
–
0
MFD
SAM7X Series [DATASHEET]
6120K–ATARM–11-Feb-14
559