SAM7X128_14 Datasheet, PDF (228/662 Pages) ATMEL Corporation – ARM-based Flash MCU

Table 27-2. Register Mapping (Continued)
Offset
Register
Name
Access
Reset
0x0070
Peripheral A Select Register⁽⁵⁾
PIO_ASR
Write-only
–
0x0074
Peripheral B Select Register⁽⁵⁾
PIO_BSR
Write-only
–
0x0078
AB Status Register⁽⁵⁾
PIO_ABSR
Read-only
0x00000000
0x007C
to
0x009C
Reserved
0x00A0
Output Write Enable
PIO_OWER
Write-only
–
0x00A4
Output Write Disable
PIO_OWDR
Write-only
–
0x00A8
Output Write Status Register
PIO_OWSR
Read-only
0x00000000
0x00AC
Reserved
Notes: 1. Reset value of PIO_PSR depends on the product implementation.
2. PIO_ODSR is Read-only or Read-write depending on PIO_OWSR I/O lines.
3. Reset value of PIO_PDSR depends on the level of the I/O lines. Reading the I/O line levels requires the clock of the
PIO Controller to be enabled, otherwise PIO_PDSR reads the levels present on the I/O line at the time the clock was
disabled.
4. PIO_ISR is reset at 0x0. However, the first read of the register may read a different value as input changes may have
occurred.
5. Only this set of registers clears the status by writing 1 in the first register and sets the status by writing 1 in the second
register.
SAM7X Series [DATASHEET]
6120K–ATARM–11-Feb-14
228