SAM7X128_14 Datasheet, PDF (367/662 Pages) ATMEL Corporation – ARM-based Flash MCU

• CP0: Compare 0
0: A compare 0 has not occurred since the last read of the Status Register.
1: A compare 0 has occurred since the last read of the Status Register.
• CP1: Compare 1
0: A compare 1 has not occurred since the last read of the Status Register.
1: A compare 1 has occurred since the last read of the Status Register.
• TXSYN: Transmit Sync
0: A Tx Sync has not occurred since the last read of the Status Register.
1: A Tx Sync has occurred since the last read of the Status Register.
• RXSYN: Receive Sync
0: An Rx Sync has not occurred since the last read of the Status Register.
1: An Rx Sync has occurred since the last read of the Status Register.
• TXEN: Transmit Enable
0: Transmit is disabled.
1: Transmit is enabled.
• RXEN: Receive Enable
0: Receive is disabled.
1: Receive is enabled.
SAM7X Series [DATASHEET]
6120K–ATARM–11-Feb-14
367