SAM7X128_14 Datasheet, PDF (448/662 Pages) ATMEL Corporation – ARM-based Flash MCU

34.6.2 UDP Global State Register
Register Name:
UDP_ GLB_STAT
Access Type:
Read-write
31
30
29
28
27
26
25
24
–
–
–
–
–
–
–
–
23
22
21
20
19
18
17
16
–
–
–
–
–
–
–
–
15
14
13
12
11
10
9
8
–
–
–
–
–
–
–
–
7
6
5
4
3
2
1
0
–
–
–
–
–
–
CONFG
FADDEN
This register is used to get and set the device state as specified in Chapter 9 of the USB Serial Bus Specification, Rev.2.0.
• FADDEN: Function Address Enable
Read:
0 = Device is not in address state.
1 = Device is in address state.
Write:
0 = No effect, only a reset can bring back a device to the default state.
1 = Sets device in address state. This occurs after a successful Set Address request. Beforehand, the UDP_ FADDR register
must have been initialized with Set Address parameters. Set Address must complete the Status Stage before setting FADDEN.
Refer to chapter 9 of the Universal Serial Bus Specification, Rev. 2.0 for more details.
• CONFG: Configured
Read:
0 = Device is not in configured state.
1 = Device is in configured state.
Write:
0 = Sets device in a non configured state
1 = Sets device in configured state.
The device is set in configured state when it is in address state and receives a successful Set Configuration request. Refer to
Chapter 9 of the Universal Serial Bus Specification, Rev. 2.0 for more details.
SAM7X Series [DATASHEET]
6120K–ATARM–11-Feb-14
448