LM3S8G62 Datasheet, PDF (606/1096 Pages) Texas Instruments – Stellaris® LM3S8G62 Microcontroller

OBSOLETE: TI has discontinued production of this device.
Analog-to-Digital Converter (ADC)
Bit/Field
21
20
19
18
Name
DCTRIG5
DCTRIG4
DCTRIG3
DCTRIG2
Type
R/W
R/W
R/W
R/W
Reset
0
0
0
0
Description
Digital Comparator Trigger 5
Value Description
1 Resets the Digital Comparator 5 trigger unit to its initial
conditions.
0 No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used.
Digital Comparator Trigger 4
Value Description
1 Resets the Digital Comparator 4 trigger unit to its initial
conditions.
0 No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used.
Digital Comparator Trigger 3
Value Description
1 Resets the Digital Comparator 3 trigger unit to its initial
conditions.
0 No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used.
Digital Comparator Trigger 2
Value Description
1 Resets the Digital Comparator 2 trigger unit to its initial
conditions.
0 No effect.
When the trigger has been cleared, this bit is automatically cleared.
Because the digital comparators use the current and previous ADC
conversion values to determine when to assert the trigger, it is important
to reset the digital comparator to initial conditions when starting a new
sequence so that stale data is not used.
606
July 24, 2012
Texas Instruments-Production Data