LM3S8G62 Datasheet, PDF (1006/1096 Pages) Texas Instruments – Stellaris® LM3S8G62 Microcontroller

Signal Tables
OBSOLETE: TI has discontinued production of this device.
Table 22-7. Signals by Pin Number (continued)
Pin Number
Pin Name
Pin Type Buffer Type^a Description
PD0
I/O
TTL
GPIO port D bit 0.
AIN15
I
Analog Analog-to-digital converter input 15.
CAN0Rx
I
TTL
CAN module 0 receive.
G1
CCP6
I/O
TTL
Capture/Compare/PWM 6.
IDX0
I
TTL
QEI module 0 index.
PWM0
O
TTL
PWM 0. This signal is controlled by PWM Generator 0.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
PD1
I/O
TTL
GPIO port D bit 1.
AIN14
I
Analog Analog-to-digital converter input 14.
CAN0Tx
O
TTL
CAN module 0 transmit.
CCP2
I/O
TTL
Capture/Compare/PWM 2.
G2
CCP7
I/O
TTL
Capture/Compare/PWM 7.
PWM1
O
TTL
PWM 1. This signal is controlled by PWM Generator 0.
PhA0
I
TTL
QEI module 0 phase A.
PhB1
I
TTL
QEI module 1 phase B.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
VDDC
G3
-
Power Positive supply for most of the logic function, including the
processor core and most peripherals. The voltage on this pin is
1.3 V and is supplied by the on-chip LDO. The VDDC pins should
only be connected to the LDO pin and an external capacitor as
specified in Table 24-6 on page 1036 .
G10
VDD
-
Power Positive supply for I/O and some logic.
G11
VDD
-
Power Positive supply for I/O and some logic.
G12
VDD
-
Power Positive supply for I/O and some logic.
PD3
I/O
TTL
GPIO port D bit 3.
AIN12
I
Analog Analog-to-digital converter input 12.
CCP0
I/O
TTL
Capture/Compare/PWM 0.
H1
CCP7
I/O
TTL
Capture/Compare/PWM 7.
PWM3
O
TTL
PWM 3. This signal is controlled by PWM Generator 1.
U1Tx
O
TTL
UART module 1 transmit. When in IrDA mode, this signal has IrDA
modulation.
PD2
I/O
TTL
GPIO port D bit 2.
AIN13
I
Analog Analog-to-digital converter input 13.
CCP5
I/O
TTL
Capture/Compare/PWM 5.
H2
CCP6
I/O
TTL
Capture/Compare/PWM 6.
PWM2
O
TTL
PWM 2. This signal is controlled by PWM Generator 1.
U1Rx
I
TTL
UART module 1 receive. When in IrDA mode, this signal has IrDA
modulation.
H3
GND
-
Power Ground reference for logic and I/O pins.
H10
VDD
-
Power Positive supply for I/O and some logic.
H11
RST
I
TTL
System reset input.
1006
Texas Instruments-Production Data
July 24, 2012