LM3S8G62 Datasheet, PDF (273/1096 Pages) Texas Instruments – Stellaris® LM3S8G62 Microcontroller

OBSOLETE: TI has discontinued production of this device.
Stellaris^® LM3S8G62 Microcontroller
Register 37: Software Reset Control 1 (SRCR1), offset 0x044
This register allows individual modules to be reset. Writes to this register are masked by the bits in
the Device Capabilities 2 (DC2) register.
Software Reset Control 1 (SRCR1)
Base 0x400F.E000
Offset 0x044
Type R/W, reset 0x00000000
31
30
29
28
27
reserved
Type RO
RO
RO
RO
RO
Reset
0
0
0
0
0
26
25
24
23
COMP1 COMP0
RO
R/W
R/W
RO
0
0
0
0
22
21
reserved
RO
RO
0
0
15
14
13
reserved
Type RO
RO
RO
Reset
0
0
0
12
I2C0
R/W
0
11
10
reserved
RO
RO
0
0
9
QEI1
R/W
0
8
QEI0
R/W
0
7
6
5
reserved
RO
RO
RO
0
0
0
20
19
18
17
16
TIMER3 TIMER2 TIMER1 TIMER0
RO
R/W
R/W
R/W
R/W
0
0
0
0
0
4
SSI0
R/W
0
3
2
reserved
RO
RO
0
0
1
0
UART1 UART0
R/W
R/W
0
0
Bit/Field
31:26
25
24
23:20
19
18
17
16
Name
reserved
COMP1
COMP0
reserved
TIMER3
TIMER2
TIMER1
TIMER0
Type
RO
R/W
R/W
RO
R/W
R/W
R/W
R/W
Reset
0
0
0
0
0
0
0
0
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Analog Comp 1 Reset Control
When this bit is set, Analog Comparator module 1 is reset. All internal
data is lost and the registers are returned to their reset states. This bit
must be manually cleared after being set.
Analog Comp 0 Reset Control
When this bit is set, Analog Comparator module 0 is reset. All internal
data is lost and the registers are returned to their reset states. This bit
must be manually cleared after being set.
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
Timer 3 Reset Control
Timer 3 Reset Control. When this bit is set, General-Purpose Timer
module 3 is reset. All internal data is lost and the registers are returned
to their reset states. This bit must be manually cleared after being set.
Timer 2 Reset Control
When this bit is set, General-Purpose Timer module 2 is reset. All internal
data is lost and the registers are returned to their reset states. This bit
must be manually cleared after being set.
Timer 1 Reset Control
When this bit is set, General-Purpose Timer module 1 is reset. All internal
data is lost and the registers are returned to their reset states. This bit
must be manually cleared after being set.
Timer 0 Reset Control
When this bit is set, General-Purpose Timer module 0 is reset. All internal
data is lost and the registers are returned to their reset states. This bit
must be manually cleared after being set.
July 24, 2012
273
Texas Instruments-Production Data