LM3S8G62 Datasheet, PDF (1015/1096 Pages) Texas Instruments – Stellaris® LM3S8G62 Microcontroller

OBSOLETE: TI has discontinued production of this device.
Stellaris^® LM3S8G62 Microcontroller
Table 22-8. Signals by Signal Name (continued)
Pin Name
SWDIO
SWO
TCK
TDI
TDO
TMS
TXON
TXOP
U0Rx
Pin Number Pin Mux / Pin
Assignment
B9
PC1 (3)
A10
PC3 (3)
A9
PC0 (3)
B8
PC2 (3)
A10
PC3 (3)
B9
PC1 (3)
L8
fixed
M8
fixed
L3
PA0 (1)
Pin Type
I/O
O
I
I
O
I
O
O
I
U0Tx
M3
PA1 (1)
O
U1DSR
M9
PF0 (9)
I
U1Rx
U1Tx
VBAT
G1
PD0 (5)
I
H2
PD2 (1)
M2
PC6 (5)
L3
PA0 (9)
E12
PB0 (5)
A6
PB4 (7)
G2
PD1 (5)
O
H1
PD3 (1)
L2
PC7 (5)
M3
PA1 (9)
D12
PB1 (5)
B7
PB5 (7)
L12
fixed
-
VDD
VDDA
K7
fixed
-
G12
K8
C10
K9
H10
G10
E10
D10
D11
G11
C7
fixed
-
C6
Buffer Type^a Description
TTL
JTAG TMS and SWDIO.
TTL
JTAG TDO and SWO.
TTL
JTAG/SWD CLK.
TTL
JTAG TDI.
TTL
JTAG TDO and SWO.
TTL
JTAG TMS and SWDIO.
TTL
TXON of the Ethernet PHY.
TTL
TXOP of the Ethernet PHY.
TTL
UART module 0 receive. When in IrDA mode, this
signal has IrDA modulation.
TTL
UART module 0 transmit. When in IrDA mode, this
signal has IrDA modulation.
TTL
UART module 1 Data Set Ready modem output
control line.
TTL
UART module 1 receive. When in IrDA mode, this
signal has IrDA modulation.
TTL
UART module 1 transmit. When in IrDA mode, this
signal has IrDA modulation.
Power
Power
Power source for the Hibernation module. It is
normally connected to the positive terminal of a
battery and serves as the battery
backup/Hibernation module power-source supply.
Positive supply for I/O and some logic.
Power
The positive supply for the analog circuits (ADC,
Analog Comparators, etc.). These are separated
from VDD to minimize the electrical noise contained
on VDD from affecting the analog functions. VDDA
pins must be supplied with a voltage that meets the
specification in Table 24-2 on page 1031 , regardless
of system implementation.
July 24, 2012
Texas Instruments-Production Data
1015