LM3S8G62 Datasheet, PDF (1012/1096 Pages) Texas Instruments – Stellaris® LM3S8G62 Microcontroller

Signal Tables
OBSOLETE: TI has discontinued production of this device.
Table 22-8. Signals by Signal Name (continued)
Pin Name
Fault3
GND
GNDA
Pin Number Pin Mux / Pin
Assignment
C12
PB3 (4)
C4
fixed
H3
C5
J3
K6
K4
K5
L10
K10
F10
J10
F11
C8
C9
B6
F12
A5
fixed
B5
Pin Type
I
-
-
HIB
I2C0SCL
I2C0SDA
IDX0
IDX1
LDO
M12
fixed
O
C11
PB2 (1)
I/O
C12
PB3 (1)
I/O
G1
PD0 (3)
I
C11
PB2 (2)
A7
PB6 (5)
A6
PB4 (6)
A2
PD7 (1)
H12
PF1 (2)
I
E3
fixed
-
LED0
LED1
MDIO
NC
NMI
OSC0
OSC1
J12
PF3 (1)
O
J11
PF2 (1)
O
L9
fixed
I/O
C1
fixed
-
C2
D2
D1
E1
E2
F1
F2
A8
PB7 (4)
I
L11
fixed
I
M11
fixed
O
Buffer Type^a Description
TTL
Power
PWM Fault 3.
Ground reference for logic and I/O pins.
Power
OD
OD
OD
TTL
The ground reference for the analog circuits (ADC,
Analog Comparators, etc.). These are separated
from GND to minimize the electrical noise contained
on VDD from affecting the analog functions.
An output that indicates the processor is in
Hibernate mode.
I²C module 0 clock.
I²C module 0 data.
QEI module 0 index.
TTL
Power
TTL
TTL
OD
-
QEI module 1 index.
Low drop-out regulator output voltage. This pin
requires an external capacitor between the pin and
GND of 1 µF or greater. The LDO pin must also be
connected to the VDDC pins at the board level in
addition to the decoupling capacitor(s).
Ethernet LED 0.
Ethernet LED 1.
MDIO of the Ethernet PHY.
No connect. Leave the pin electrically
unconnected/isolated.
TTL
Analog
Analog
Non-maskable interrupt.
Main oscillator crystal input or an external clock
reference input.
Main oscillator crystal output. Leave unconnected
when using a single-ended clock source.
1012
Texas Instruments-Production Data
July 24, 2012