PIC18F23K22 Datasheet, PDF (435/492 Pages) Microchip Technology – 28/40/44-Pin, Low-Power, High-Performance Microcontrollers with nanoWatt XLP Technology

PIC18(L)F2X/4XK22
27.7 DC Characteristics: Secondary Oscillator Supply Current, PIC18(L)F2X/4XK22
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
Param
No.
Device Characteristics
Typ Max Units
Conditions
D137
D138
D139
Note 1:
2:
10 50 A
-40°C
13 50 A
16 50 A
+25°C
+85°C
VDD = 1.8V
19 60 A
+125°C
11 50 A
15 50 A
18 50 A
22 60 A
-40°C
+25°C
+85°C
+125°C
VDD = 3.0V
FOSC = 32 kHz
(SEC_IDLE mode,
SOSC source)
13 50 A
-40°C
17 50 A
20 50 A
+25°C
+85°C
VDD = 5.0V
24 60 A
+125°C
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temper-
ature, also have an impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
All I/O pins set as outputs driven to VSS;
MCLR = VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).
 2010 Microchip Technology Inc.
Preliminary
DS41412B-page 435