PIC18F23K22 Datasheet, PDF (428/492 Pages) Microchip Technology – 28/40/44-Pin, Low-Power, High-Performance Microcontrollers with nanoWatt XLP Technology

PIC18(L)F2X/4XK22
27.3 DC Characteristics: RC Run Supply Current, PIC18(L)F2X/4XK22 (Continued)
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature
-40°C  TA  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature
-40°C  TA  +125°C
Param
No.
D035
D036
D037
D038
D039
Device Characteristics
Typ Max Units
1.0 1.7 mA -40°C to +125°C
1.7
2.8 mA -40°C to +125°C
1.2 1.9 _mA -40°C to +125°C
2.0 3.2 mA -40°C to +125°C
2.3 3.6 mA -40°C to +125°C
Conditions
VDD = 1.8V
VDD = 3.0V
VDD = 1.8V
VDD = 3.0V
VDD = 5.0V
FOSC = 16 MHz
(RC_RUN mode,
HFINTOSC source)
FOSC = 16 MHz
(RC_RUN mode,
HFINTOSC source)
D041
D043
D044
Note 1:
2:
6.5
10 mA -40°C to +125°C
VDD = 3.0V
FOSC = 64 MHz
(RC_RUN mode,
HFINTOSC + PLL
source)
7.0 11.0 mA -40°C to +125°C
7.9
12.0 mA -40°C to +125°C
VDD = 3.0V
VDD = 5.0V
FOSC = 64 MHz
(RC_RUN mode,
HFINTOSC + PLL
source)
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin
loading and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an
impact on the current consumption.
Test condition: All Peripheral Module Control bits in PMD0, PMD1 and PMD2 set to ‘1’.
The test conditions for all IDD measurements in active operation mode are:
All I/O pins set as outputs driven to Vss;
MCLR = VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).
DS41412B-page 428
Preliminary
 2010 Microchip Technology Inc.