PIC18F23K22 Datasheet, PDF (430/492 Pages) Microchip Technology – 28/40/44-Pin, Low-Power, High-Performance Microcontrollers with nanoWatt XLP Technology

PIC18(L)F2X/4XK22
27.4 DC Characteristics: RC Idle Supply Current, PIC18(L)F2X/4XK22 (Continued)
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
Param
No.
Device Characteristics
Typ Max Units
Conditions
D057
D058
D059
D060
D061
D062
D063
D064
0.3 0.50
0.4 0.70
0.45 0.80
0.5 0.9
0.8 _1.4
0.6 1.0
0.9 1.4
1.1 1.7
mA -40°C to +125°C
mA -40°C to +125°C
mA -40°C to +125°C
mA -40°C to +125°C
mA -40°C to +125°C
mA -40°C to +125°C
mA -40°C to +125°C
mA -40°C to +125°C
VDD = 1.8V
VDD = 3.0V
VDD = 5.0V
VDD = 1.8V
VDD = 3.0V
VDD = 1.8V
VDD = 3.0V
VDD = 5.0V
FOSC = 1 MHz
(RC_IDLE mode,
HFINTOSC source)
FOSC = 16 MHz
(RC_IDLE mode,
HFINTOSC source)
FOSC = 16 MHz
(RC_IDLE mode,
HFINTOSC source)
D066
D068
D069
Note 1:
2:
2.5 4 mA -40°C to +125°C VDD = 3.0V
FOSC = 64 MHz
(RC_IDLE mode,
HFINTOSC + PLL
source)
3.0 5.0 _mA -40°C to +125°C VDD = 3.0V
3.5 6.0 mA -40°C to +125°C VDD = 5.0V
FOSC = 64 MHz
(RC_IDLE mode,
HFINTOSC + PLL
source)
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temper-
ature, also have an impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD;
MCLR = VDD; WDT enabled/disabled as specified.
For RC oscillator configurations, current through REXT is not included. The current through the resistor can
be estimated by the formula Ir = VDD/2REXT (mA) with REXT in k.
DS41412B-page 430
Preliminary
 2010 Microchip Technology Inc.