PIC18F23K22 Datasheet, PDF (375/492 Pages) Microchip Technology – 28/40/44-Pin, Low-Power, High-Performance Microcontrollers with nanoWatt XLP Technology

PIC18(L)F2X/4XK22
ANDWF
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Words:
Cycles:
Q Cycle Activity:
Q1
Decode
AND W with f
ANDWF f {,d {,a}}
0  f  255
d [0,1]
a [0,1]
(W) .AND. (f)  dest
N, Z
0001 01da ffff ffff
The contents of W are AND’ed with
register ‘f’. If ‘d’ is ‘0’, the result is stored
in W. If ‘d’ is ‘1’, the result is stored back
in register ‘f’ (default).
If ‘a’ is ‘0’, the Access Bank is selected.
If ‘a’ is ‘1’, the BSR is used to select the
GPR bank.
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction operates
in Indexed Literal Offset Addressing
mode whenever f 95 (5Fh). See
Section 25.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
1
1
Q2
Read
register ‘f’
Q3
Process
Data
Q4
Write to
destination
Example:
ANDWF
Before Instruction
W
= 17h
REG = C2h
After Instruction
W
REG
= 02h
= C2h
REG, 0, 0
BC
Branch if Carry
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Words:
Cycles:
Q Cycle Activity:
If Jump:
Q1
Decode
No
operation
If No Jump:
Q1
Decode
BC n
-128  n  127
if CARRY bit is ‘1’
(PC) + 2 + 2n  PC
None
1110 0010 nnnn nnnn
If the CARRY bit is ‘1’, then the program
will branch.
The 2’s complement number ‘2n’ is
added to the PC. Since the PC will have
incremented to fetch the next
instruction, the new address will be
PC + 2 + 2n. This instruction is then a
two-cycle instruction.
1
1(2)
Q2
Read literal
‘n’
No
operation
Q3
Process
Data
No
operation
Q4
Write to PC
No
operation
Q2
Read literal
‘n’
Q3
Process
Data
Q4
No
operation
Example:
HERE
Before Instruction
PC
=
After Instruction
If CARRY =
PC
=
If CARRY =
PC
=
BC 5
address (HERE)
1;
address (HERE + 12)
0;
address (HERE + 2)
 2010 Microchip Technology Inc.
Preliminary
DS41412B-page 375