PIC18F23K22 Datasheet, PDF (434/492 Pages) Microchip Technology – 28/40/44-Pin, Low-Power, High-Performance Microcontrollers with nanoWatt XLP Technology

PIC18(L)F2X/4XK22
27.7 DC Characteristics: Secondary Oscillator Supply Current, PIC18(L)F2X/4XK22
PIC18LF2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
PIC18F2X/4XK22
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  TA  +125°C
Param
No.
Device Characteristics
Typ Max Units
Conditions
D130 _{Supply Current (IDD)}^(1),(2) 4.0 14 A
4.5 14 A
-40°C
+25°C
5.0 — A
+60°C
VDD = 1.8V
D131
5.5 18 A
9.0 30 A
7.0 20 A
7.5 20 A
+85°C
+125°C
-40°C
+25°C
FOSC = 32 kHz
(SEC_RUN mode,
SOSC source)
8.0 — A
+60°C
VDD = 3.0V
8.5 22 A
+85°C
11.0 35 A
+125°C
D132
12 50 A
-40°C
16 50 A
19 50 A
+25°C
+85°C
VDD = 1.8V
22 60 A
+125°C
D133
16 50 A
20 50 A
23 50 A
27 60 A
-40°C
+25°C
+85°C
+125°C
VDD = 3.0V
FOSC = 32 kHz
(SEC_RUN mode,
SOSC source)
D134
18 50 A
-40°C
22 50 A
25 50 A
+25°C
+85°C
VDD = 5.0V
30 60 A
+125°C
D135
1.5 8 A
-40°C
2.0 8 A
+25°C
2.5 — A
+60°C
VDD = 1.8V
D136
3.0 10 A
6.0 25 A
2.0 10 A
2.5 10 A
+85°C
+125°C
-40°C
+25°C
FOSC = 32 kHz
(SEC_IDLE mode,
SOSC source)
3.0 — A
+60°C
VDD = 3.0V
3.5 12 A
+85°C
7.0 30 A
+125°C
Note 1:
2:
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as
I/O pin loading and switching rate, oscillator type and circuit, internal code execution pattern and temper-
ature, also have an impact on the current consumption.
The test conditions for all IDD measurements in active operation mode are:
All I/O pins set as outputs driven to VSS;
MCLR = VDD;
OSC1 = external square wave, from rail-to-rail (PRI_RUN and PRI_IDLE only).
DS41412B-page 434
Preliminary
 2010 Microchip Technology Inc.