LAN9420 Datasheet, PDF (102/171 Pages) SMSC Corporation – Single-Chip Ethernet Controller with HP Auto-MDIX Support and PCI Interface

Single-Chip Ethernet Controller with HP Auto-MDIX Support and PCI Interface
Datasheet
BITS
DESCRIPTION
8 EEPROM Loaded
When set, this bit indicates that a valid EEPROM was found, and that the
MAC address and SSVID/SSID programming have completed normally. This
bit is set after a successful load of the MAC address and SSVID/SSID after
power-up, or after a RELOAD command has completed.
7:0 EPC Address (EPC_ADDR)
The 8-bit value in this field is used by the EEPROM Controller to address
the specific memory location in the Serial EEPROM.
This is a Byte aligned address.
TYPE
R/WC
R/W
DEFAULT
0b
00h
Revision 1.6 (07-18-11)
102
DATASHEET
SMSC LAN9420/LAN9420i