PIC24FJ256DA210 Datasheet, PDF (379/408 Pages) Microchip Technology – 64/100-Pin, 16-Bit Flash Microcontrollers with Graphics Controller and USB On-The-Go (OTG)

PIC24FJ256DA210 FAMILY
TABLE 30-10: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
Operating Conditions: -40°C < TA < +85°C (unless otherwise stated)
Param
No.
Symbol
Characteristics
Min Typ Max Units
Comments
VRGOUT
VBG
CEFC
Regulator Output Voltage
Internal Band Gap Reference
External Filter Capacitor Value
TVREG
TBG
Band Gap Reference Start-up
Time
— 1.8 — V
— 1.2 — V
4.7 10 — F Series resistance < 3 Ohm
recommended; < 5 Ohm
required.
— 10 — s VREGS = 1, VREGS = 0 with
WUTSEL<1:0> = 01 or any POR
or BOR
— 190 — s Sleep wake-up with VREGS = 0
and WUTSEL<1:0> = 11
—
1 — ms
30.2 AC Characteristics and Timing Parameters
The information contained in this section defines the PIC24FJ256DA210 family AC characteristics and timing parameters.
TABLE 30-11: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
AC CHARACTERISTICS
Standard Operating Conditions: 2.2V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
Operating voltage VDD range as described in Section 30.1 “DC Characteristics”.
FIGURE 30-2:
LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
Load Condition 1 – for all pins except OSCO
Load Condition 2 – for OSCO
VDD/2
RL
Pin
CL
VSS
Pin
CL
VSS
RL = 464
CL = 50 pF for all pins except OSCO
15 pF for OSCO output
 2010 Microchip Technology Inc.
DS39969B-page 379