PIC24FJ256DA210 Datasheet, PDF (107/408 Pages) Microchip Technology – 64/100-Pin, 16-Bit Flash Microcontrollers with Graphics Controller and USB On-The-Go (OTG)

PIC24FJ256DA210 FAMILY
REGISTER 7-10: IFS5: INTERRUPT FLAG STATUS REGISTER 5
U-0
—
bit 15
U-0
R/W-0, HS R/W-0, HS R/W-0, HS R/W-0, HS
—
IC9IF
OC9IF
SPI3IF
SPF3IF
R/W-0, HS
U4TXIF
R/W-0, HS
U4RXIF
bit 8
R/W-0, HS
U4ERIF
bit 7
R/W-0, HS
USB1IF
R/W-0, HS
MI2C3IF
R/W-0, HS
SI2C3IF
R/W-0, HS
U3TXIF
R/W-0, HS
U3RXIF
R/W-0, HS
U3ERIF
U-0
—
bit 0
Legend:
R = Readable bit
-n = Value at POR
HS = Hardware Settable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-14
bit 13
bit 12
bit 11
bit 10
bit 9
bit 8
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
Unimplemented: Read as ‘0’
IC9IF: Input Capture Channel 9 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
OC9IF: Output Compare Channel 9 Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
SPI3IF: SPI3 Event Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
SPF3IF: SPI3 Fault Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
U4TXIF: UART4 Transmitter Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
U4RXIF: UART4 Receiver Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
U4ERIF: UART4 Error Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
USB1IF: USB1 (USB OTG) Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
MI2C3IF: Master I2C3 Event Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
SI2C3IF: Slave I2C3 Event Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
U3TXIF: UART3 Transmitter Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
U3RXIF: UART3 Receiver Interrupt Flag Status bit
1 = Interrupt request has occurred
0 = Interrupt request has not occurred
 2010 Microchip Technology Inc.
DS39969B-page 107