|
PIC24FJ256DA210 Datasheet, PDF (375/408 Pages) Microchip Technology – 64/100-Pin, 16-Bit Flash Microcontrollers with Graphics Controller and USB On-The-Go (OTG) | |||
|
◁ |
PIC24FJ256DA210 FAMILY
TABLE 30-5: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.2V to 3.6V (unless otherwise stated)
Operating temperature -40°C ï£ TA ï£ +85°C for Industrial
Parameter
No.
Typical(1)
Max
Units
Conditions
Idle Current (IIDLE)(2)
DC40D
170
320
ïA
DC40E
170
320
ïA
DC40F
220
380
ïA
DC43D
0.6
1.2
mA
DC43E
0.6
1.2
mA
-40°C
+25°C
+85°C
-40°C
+25°C
3.3V(3)
3.3V(3)
1 MIPS
4 MIPS
DC43F
0.7
1.2
mA
+85°C
DC47D
DC47E
DC47F
2.3
4.8
mA
2.3
4.8
mA
2.4
4.8
mA
-40°C
+25°C
+85°C
3.3V(3)
16 MIPS
DC50D
DC50E
0.8
1.8
mA
0.8
1.8
mA
-40°C
+25°C
3.3V(3)
FRC (4 MIPS)
DC50F
1.0
1.8
mA
+85°C
DC51D
DC51E
DC51F
Note 1:
2:
3:
40.0
85
ïA
40.0
85
ïA
-40°C
+25°C
3.3V(3)
LPRC (31 kHz)
120.0
210
ïA
+85°C
Data in âTypicalâ column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
Base IIDLE current is measured with the core off; OSCI driven with external square wave from rail to rail.
All I/O pins are configured as inputs and pulled to VDD. MCLR = VDD; WDT and FSCM are disabled. No
peripheral modules are operating and all of the Peripheral Module Disable (PMD) bits are set.
On-chip voltage regulator enabled (ENVREG tied to VDD). Brown-out Reset (BOR) is enabled.
ï£ 2010 Microchip Technology Inc.
DS39969B-page 375
|
▷ |