PIC24FJ256DA210 Datasheet, PDF (259/408 Pages) Microchip Technology – 64/100-Pin, 16-Bit Flash Microcontrollers with Graphics Controller and USB On-The-Go (OTG)

PIC24FJ256DA210 FAMILY
REGISTER 18-7: U1CON: USB CONTROL REGISTER (DEVICE MODE)
U-0
U-0
U-0
U-0
U-0
U-0
U-0
—
—
—
—
—
—
—
bit 15
U-0
—
bit 8
U-0
—
bit 7
R-x, HSC
SE0
R/W-0
PKTDIS
U-0
R/W-0
R/W-0
R/W-0
R/W-0
—
HOSTEN RESUME PPBRST
USBEN
bit 0
Legend:
R = Readable bit
-n = Value at POR
U = Unimplemented bit, read as ‘0’
W = Writable bit
HSC = Hardware Settable/Clearable bit
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Unimplemented: Read as ‘0’
SE0: Live Single-Ended Zero Flag bit
1 = Single-ended zero is active on the USB bus
0 = No single-ended zero is detected
PKTDIS: Packet Transfer Disable bit
1 = SIE token and packet processing are disabled; automatically set when a SETUP token is received
0 = SIE token and packet processing are enabled
Unimplemented: Read as ‘0’
HOSTEN: Host Mode Enable bit
1 = USB host capability is enabled; pull-downs on D+ and D- are activated in hardware
0 = USB host capability is disabled
RESUME: Resume Signaling Enable bit
1 = Resume signaling is activated
0 = Resume signaling is disabled
PPBRST: Ping-Pong Buffers Reset bit
1 = Reset all Ping-Pong Buffer Pointers to the even BD banks
0 = Ping-Pong Buffer Pointers are not reset
USBEN: USB Module Enable bit
1 = USB module and supporting circuitry are enabled (device attached); D+ pull-up is activated in hardware
0 = USB module and supporting circuitry are disabled (device detached)
 2010 Microchip Technology Inc.
DS39969B-page 259