PIC24FJ256DA210 Datasheet, PDF (377/408 Pages) Microchip Technology – 64/100-Pin, 16-Bit Flash Microcontrollers with Graphics Controller and USB On-The-Go (OTG)

PIC24FJ256DA210 FAMILY
TABLE 30-7: DC CHARACTERISTICS: I/O PIN INPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.2V to 3.6V (unless otherwise
stated)
Operating temperature -40°C  TA  +85°C for Industrial
Param Symbo
No.
l
Characteristic
Min
Typ⁽¹⁾ Max Units
Conditions
VIL
Input Low Voltage⁽³⁾
DI10
I/O Pins with ST Buffer
VSS
— 0.2 VDD V
DI11
I/O Pins with TTL Buffer
VSS
— 0.15 VDD V
DI15
MCLR
VSS
— 0.2 VDD V
DI16
DI17
DI18
OSCI (XT mode)
VSS
— 0.2 VDD V
OSCI (HS mode)
VSS
— 0.2 VDD V
I/O Pins with I²C™ Buffer:
VSS
— 0.3 VDD V
DI19
I/O Pins with SMBus Buffer:
VSS
VIH
Input High Voltage⁽³⁾
—
0.8
V SMBus enabled
DI20
I/O Pins with ST Buffer:
with Analog Functions,
Digital Only
0.8 VDD
0.8 VDD
—
VDD
V
—
5.5
V
DI21
I/O Pins with TTL Buffer:
with Analog Functions,
0.25 VDD + 0.8 —
VDD
V
Digital Only
0.25 VDD + 0.8 —
5.5
V
DI25
MCLR
0.8 VDD
—
VDD
V
DI26
OSCI (XT mode)
0.7 VDD
—
VDD
V
DI27
DI28
DI29
OSCI (HS mode)
I/O Pins with I²C™ Buffer:
with Analog Functions,
Digital Only
I/O Pins with SMBus Buffer:
with Analog Functions,
Digital Only
0.7 VDD
0.7 VDD
0.7 VDD
2.1
2.1
—
VDD
V
—
VDD
V
—
5.5
V
VDD
5.5
2.5V  VPIN  VDD
V
V
DI30
DI30A
ICNPU
ICNPD
IIL
CNxx Pull-up Current
CNxx Pull-down Current
Input Leakage Current⁽²⁾
150
350
550
A VDD = 3.3V, VPIN = VSS
15
70
150
A VDD = 3.3V, VPIN = VDD
DI50
I/O Ports
—
—
+1
A VSS  VPIN  VDD,
pin at high-impedance
DI51
Analog Input Pins
—
—
+1
A VSS  VPIN  VDD,
pin at high-impedance
DI55
MCLR
—
—
+1
A VSS VPIN VDD
DI56
OSCI/CLKI
—
—
+1
A VSS VPIN VDD,
EC, XT and HS modes
Note 1:
2:
3:
Data in “Typ” column is at 3.3V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
Negative current is defined as current sourced by the pin.
Refer to Table 1-1 for I/O pins buffer types.
 2010 Microchip Technology Inc.
DS39969B-page 377