PIC24FJ256DA210 Datasheet, PDF (280/408 Pages) Microchip Technology – 64/100-Pin, 16-Bit Flash Microcontrollers with Graphics Controller and USB On-The-Go (OTG)

PIC24FJ256DA210 FAMILY
REGISTER 19-6: PMCSxBS: CHIP SELECT x BASE ADDRESS REGISTER
R/W⁽¹⁾
R/W⁽¹⁾
R/W⁽¹⁾
R/W⁽¹⁾
R/W⁽¹⁾
R/W⁽¹⁾
R/W⁽¹⁾
BASE23 BASE22 BASE21 BASE20 BASE19
BASE18
BASE17
bit 15
R/W⁽¹⁾
U-0
U-0
U-0
R/W⁽¹⁾
U-0
U-0
BASE15
—
—
—
BASE11
—
—
bit 7
R/W⁽¹⁾
BASE16
bit 8
U-0
—
bit 0
Legend:
R = Readable bit
-n = Value at POR
W = Writable bit
‘1’ = Bit is set
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15-7
bit 6-4
bit 3
bit 2-0
BASE<23:15>: Chip Select x Base Address bits⁽²⁾
Unimplemented: Read as ‘0’
BASE<11>: Chip Select x Base Address bits⁽²⁾
Unimplemented: Read as ‘0’
Note 1:
2:
Value at POR is 0x0200 for PMCS1BS and 0x0600 for PMCS2BS.
If the whole PMCS2BS register is written together as 0x0000, then the last EDS address for the Chip
Select 1 will be 0xFFFFFF. In this case, the Chip Select 2 should not be used. PMCS1BS has no such
feature.
DS39969B-page 280
 2010 Microchip Technology Inc.