English
Language : 

PIC24FJ256DA210 Datasheet, PDF (282/408 Pages) Microchip Technology – 64/100-Pin, 16-Bit Flash Microcontrollers with Graphics Controller and USB On-The-Go (OTG)
PIC24FJ256DA210 FAMILY
REGISTER 19-8: PMSTAT: EPMP STATUS REGISTER (SLAVE MODE ONLY)
R-0, HSC R/W-0 HS
U-0
IBF
IBOV
—
bit 15
U-0
R-0, HSC R-0, HSC R-0, HSC
—
IB3F
IB2F
IB1F
R-0, HSC
IB0F
bit 8
R-1, HSC R/W-0 HS
U-0
OBE
OBUF
—
bit 7
U-0
R-1, HSC R-1, HSC R-1, HSC R-1, HSC
—
OB3E
OB2E
OB1E
OB0E
bit 0
Legend:
R = Readable bit
-n = Value at POR
HS = Hardware Settable bit
W = Writable bit
‘1’ = Bit is set
HSC = Hardware Settable/Clearable bit
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
x = Bit is unknown
bit 15
bit 14
bit 13-12
bit 11-8
bit 7
bit 6
bit 5-4
bit 3-0
IBF: Input Buffer Full Status bit
1 = All writable input buffer registers are full
0 = Some or all of the writable input buffer registers are empty
IBOV: Input Buffer Overflow Status bit
1 = A write attempt to a full input register occurred (must be cleared in software)
0 = No overflow occurred
Unimplemented: Read as ‘0’
IBxF: Input Buffer x Status Full bit(1)
1 = Input buffer contains unread data (reading buffer will clear this bit)
0 = Input buffer does not contain unread data
OBE: Output Buffer Empty Status bit
1 = All readable output buffer registers are empty
0 = Some or all of the readable output buffer registers are full
OBUF: Output Buffer Underflow Status bit
1 = A read occurred from an empty output register (must be cleared in software)
0 = No underflow occurred
Unimplemented: Read as ‘0’
OBxE: Output Buffer x Status Empty bit
1 = Output buffer is empty (writing data to the buffer will clear this bit)
0 = Output buffer contains untransmitted data
Note 1: Even though an individual bit represents the byte in the buffer, the bits corresponding to the Word (byte 0
and 1, or byte 2 and 3) gets cleared even on byte reading.
DS39969B-page 282
 2010 Microchip Technology Inc.