S9S12G128F0CLF Datasheet, PDF (496/1158 Pages) Freescale Semiconductor, Inc – MC9S12G Family Reference Manual

Freescale’s Scalable Controller Area Network (S12MSCANV3)
Table 16-18. CANIDAC Register Field Descriptions
Field
Description
5-4
Identifier Acceptance Mode — The CPU sets these flags to define the identifier acceptance filter organization
IDAM[1:0] (see Section 16.4.3, “Identifier Acceptance Filter”). Table 16-19 summarizes the different settings. In filter closed
mode, no message is accepted such that the foreground buffer is never reloaded.
2-0
Identifier Acceptance Hit Indicator — The MSCAN sets these flags to indicate an identifier acceptance hit (see
IDHIT[2:0] Section 16.4.3, “Identifier Acceptance Filter”). Table 16-20 summarizes the different settings.
IDAM1
0
0
1
1
Table 16-19. Identifier Acceptance Mode Settings
IDAM0
0
1
0
1
Identifier Acceptance Mode
Two 32-bit acceptance filters
Four 16-bit acceptance filters
Eight 8-bit acceptance filters
Filter closed
Table 16-20. Identifier Acceptance Hit Indication
IDHIT2
0
0
0
0
1
1
1
1
IDHIT1
0
0
1
1
0
0
1
1
IDHIT0
0
1
0
1
0
1
0
1
Identifier Acceptance Hit
Filter 0 hit
Filter 1 hit
Filter 2 hit
Filter 3 hit
Filter 4 hit
Filter 5 hit
Filter 6 hit
Filter 7 hit
The IDHITx indicators are always related to the message in the foreground buffer (RxFG). When a
message gets shifted into the foreground buffer of the receiver FIFO the indicators are updated as well.
16.3.2.13 MSCAN Reserved Register
This register is reserved for factory testing of the MSCAN module and is not available in normal system
operating modes.
MC9S12G Family Reference Manual, Rev.1.10
496
Freescale Semiconductor