|
S9S12G128F0CLF Datasheet, PDF (223/1158 Pages) Freescale Semiconductor, Inc – MC9S12G Family Reference Manual | |||
|
◁ |
5V Analog Comparator (ACMPV1)
The following setup is recommended to control an external component:
1. Route internal monitoring signals to ACMP inputs: PRR2[ACROV]=1
2. Enable ACMP raw signal output on ACMPO1 pin: PRR2[ACOPE1]=1
3. Select desired ACMPO1 output polarity by setting PRR2[ACOPS]
4. Conï¬gure ACMP to trigger on rising edge: ACMPC[ACMOD1:ACMOD0]=0b01
5. Enable ACMP: ACMCP[ACE]=1
NOTE
Operation of the device with supply VDD35 between maximum speciï¬ed
operating voltage and Vassert(max) must be limited over total lifetime (refer
to operating conditions in App. A). The TJ(max) speciï¬cation must be
obeyed.
MC9S12G Family Reference Manual, Rev.1.10
Freescale Semiconductor
223
|
▷ |