S9S12G128F0CLF Datasheet, PDF (1069/1158 Pages) Freescale Semiconductor, Inc – MC9S12G Family Reference Manual

A.1.3.2 Analog Reference
This group consists of the VRH pin.
Electrical Characteristics
A.1.3.3 Oscillator
The pins EXTAL, XTAL dedicated to the oscillator have a nominal 1.8V level.
A.1.3.4 TEST
This pin is used for production testing only. The TEST pin must be tied to ground in all applications.
A.1.4 Current Injection
Power supply must maintain regulation within operating V_DD35 or V_DD range during instantaneous and
operating maximum current conditions. If positive injection current (V_in > V_DD35) is greater than I_DD35,
the injection current may flow out of V_DD35 and could result in external power supply going out of
regulation. Ensure external V_DD35 load will shunt current greater than maximum injection current. This
will be the greatest risk when the MCU is not consuming power; e.g., if no system clock is present, or if
clock rate is very low which would reduce overall power consumption.
A.1.5 Absolute Maximum Ratings
Absolute maximum ratings are stress ratings only. A functional operation under or outside those maxima
is not guaranteed. Stress beyond those limits may affect the reliability or cause permanent damage of the
device.
This device contains circuitry protecting against damage due to high static voltage or electrical fields;
however, it is advised that normal precautions be taken to avoid application of any voltages higher than
maximum-rated voltages to this high-impedance circuit. Reliability of operation is enhanced if unused
inputs are tied to an appropriate logic voltage level (e.g., either V_SS35 or V_DD35).
Freescale Semiconductor
MC9S12G Family Reference Manual, Rev.1.10
1069