MC68HC08AZ32A Datasheet, PDF (323/456 Pages) Motorola, Inc – HCMOS Microcontroller Unit

20.3 Features
Freescale Semiconductor, Inc.
MSCAN08 Controller (MSCAN08)
Features
Basic features of the MSCAN08 are:
• Modular Architecture
• Implementation of the CAN Protocol — Version 2.0A/B
– Standard and Extended Data Frames.
– 0–8 Bytes Data Length.
– Programmable Bit Rate up to 1 Mbps Depending on the Actual
Bit Timing and the Clock Jitter of the PLL
• Support for Remote Frames
• Double-Buffered Receive Storage Scheme
• Triple-Buffered Transmit Storage Scheme with Internal
Prioritisation Using a “Local Priority” Concept
• Flexible Maskable Identifier Filter Supports Alternatively One Full
Size Extended Identifier Filter or Two 16-Bit Filters or Four 8-Bit
Filters
• Programmable Wakeup Functionality with Integrated Low-Pass
Filter
• Programmable Loop-Back Mode Supports Self-Test Operation
• Separate Signalling and Interrupt Capabilities for All CAN
Receiver and Transmitter Error States (Warning, Error Passive,
Bus Off)
• Programmable MSCAN08 Clock Source Either CPU Bus Clock or
Crystal Oscillator Output
• Programmable Link to On-Chip Timer Interface Module (TIMB) for
Time-Stamping and Network Synchronization
• Low-Power Sleep Mode
MC68HC08AZ32A — Rev 1.0
MOTOROLA
MSCAN08 Controller (MSCAN08)
For More Information On This Product,
Go to: www.freescale.com
Technical Data
323