MC68HC08AZ32A Datasheet, PDF (129/456 Pages) Motorola, Inc – HCMOS Microcontroller Unit

Freescale Semiconductor, Inc.
Clock Generator Module (CGM)
I/O Signals
SIMOSCEN
CGMXCLK
R_S^*
R_B
X₁
C₁
C₂
V_DD
C_F
C_BYP
*R_S can be 0 (shorted) when used with higher-frequency crystals. Refer to manufacturer’s data.
Figure 8-3. CGM External Connections
8.5 I/O Signals
The following paragraphs describe the CGM input/output (I/O) signals.
8.5.1 Crystal Amplifier Input Pin (OSC1)
The OSC1 pin is an input to the crystal oscillator amplifier.
8.5.2 Crystal Amplifier Output Pin (OSC2)
The OSC2 pin is the output of the crystal oscillator inverting amplifier.
8.5.3 External Filter Capacitor Pin (CGMXFC)
The CGMXFC pin is required by the loop filter to filter out phase
corrections. A small external capacitor is connected to this pin.
NOTE:
To prevent noise problems, C_F should be placed as close to the
CGMXFC pin as possible with minimum routing distances and no routing
of other signals across the C_F connection.
MC68HC08AZ32A — Rev 1.0
MOTOROLA
Clock Generator Module (CGM)
For More Information On This Product,
Go to: www.freescale.com
Technical Data
129