PIC18F67J11-IPT Datasheet, PDF (395/448 Pages) Microchip Technology – 64/80-Pin High-Performance, 1-Mbit Flash Microcontrollers with nanoWatt Technology

PIC18F87J11 FAMILY
27.2 DC Characteristics: Power-Down and Supply Current
PIC18F87J11 Family (Industrial) (Continued)
PIC18F87J11 Family
(Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature
-40°C ≤ TA ≤ +85°C for industrial
Param
No.
Device
Typ Max Units
Conditions
D022 Module Differential Currents (ΔIWDT, ΔIOSCB, ΔIAD)
Watchdog Timer 2.1 7.0 μA
2.2 7.0 μA
4.3 9.5 μA
3.0 8.0 μA
3.1 8.0 μA
5.5 10.4 μA
5.9 12.1 μA
6.2 12.1 μA
6.9 13.6 μA
D025
(ΔIOSCB)
Timer1 Oscillator 14 24 μA
15 24 μA
23 36 μA
17 26 μA
18 26 μA
25 38 μA
19 35 μA
21 35 μA
28 44 μA
D026
(ΔIAD)
A/D Converter 3.0 10.0 μA
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
-40°C
+25°C
+85°C
-40°C to +85°C
VDD = 2.0V,
VDDCORE = 2.0V⁽⁴⁾
VDD = 2.5V,
VDDCORE = 2.5V⁽⁴⁾
VDD = 3.3V
VDD = 2.0V,
VDDCORE = 2.0V⁽⁴⁾
VDD = 2.5V,
VDDCORE = 2.5V⁽⁴⁾
VDD = 3.3V
VDD = 2.0V,
VDDCORE = 2.0V⁽⁴⁾
32 kHz on Timer1⁽³⁾
32 kHz on Timer1⁽³⁾
32 kHz on Timer1⁽³⁾
3.0 10.0 μA -40°C to +85°C
VDD = 2.5V,
A/D on, not converting
VDDCORE = 2.5V⁽⁴⁾
Note 1:
2:
3:
4:
5:
3.2 11.0 μA -40°C to +85°C
VDD = 3.3V
The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in high-impedance state and tied to VDD or VSS and all features that add delta
current disabled (such as WDT, Timer1 oscillator, BOR, etc.).
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD;
MCLR = VDD; WDT enabled/disabled as specified.
Standard, low-cost 32 kHz crystals have an operating temperature range of -10°C to +70°C. Extended temperature
crystals are available at a much higher cost.
Voltage regulator disabled (ENVREG = 0, tied to VSS).
Voltage regulator enabled (ENVREG = 1, tied to VDD, REGSLP = 1).
© 2009 Microchip Technology Inc.
DS39778D-page 395