PIC18F67J11-IPT Datasheet, PDF (17/448 Pages) Microchip Technology – 64/80-Pin High-Performance, 1-Mbit Flash Microcontrollers with nanoWatt Technology

PIC18F87J11 FAMILY
TABLE 1-3: PIC18F6XJ1X PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number _{Pin Buffer}
64-TQFP ^{Type Type}
Description
PORTC is a bidirectional I/O port.
RC0/T1OSO/T13CKI
RC0
T1OSO
T13CKI
30
I/O
ST
Digital I/O.
O
—
Timer1 oscillator output.
I
ST
Timer1/Timer3 external clock input.
RC1/T1OSI/ECCP2/P2A
29
RC1
T1OSI
ECCP2⁽¹⁾
P2A⁽¹⁾
I/O
ST
I CMOS
I/O
ST
O
—
Digital I/O.
Timer1 oscillator input.
Capture 2 input/Compare 2 output/PWM2 output.
ECCP2 PWM output A.
RC2/ECCP1/P1A
RC2
ECCP1
P1A
33
I/O
ST
Digital I/O.
I/O
ST
Capture 1 input/Compare 1 output/PWM1 output.
O
—
ECCP1 PWM output A.
RC3/SCK1/SCL1
RC3
SCK1
SCL1
34
I/O
ST
Digital I/O.
I/O
ST
I/O
ST
Synchronous serial clock input/output for SPI mode.
Synchronous serial clock input/output for I²C™ mode.
RC4/SDI1/SDA1
RC4
SDI1
SDA1
35
I/O
ST
Digital I/O.
I
ST
I/O
ST
SPI data in.
I²C data I/O.
RC5/SDO1
RC5
SDO1
36
I/O
ST
Digital I/O.
O
—
SPI data out.
RC6/TX1/CK1
RC6
TX1
CK1
31
I/O
ST
Digital I/O.
O
—
EUSART1 asynchronous transmit.
I/O
ST
EUSART1 synchronous clock (see related RX1/DT1).
RC7/RX1/DT1
RC7
RX1
DT1
32
I/O
ST
Digital I/O.
I
ST
EUSART1 asynchronous receive.
I/O
ST
EUSART1 synchronous data (see related TX1/CK1).
Legend:
Note 1:
2:
TTL = TTL compatible input
CMOS = CMOS compatible input or output
ST = Schmitt Trigger input with CMOS levels
Analog = Analog input
I = Input
O
= Output
P = Power
OD
= Open-Drain (no P diode to VDD)
Default assignment for ECCP2/P2A when Configuration bit, CCP2MX, is set.
Alternate assignment for ECCP2/P2A when Configuration bit, CCP2MX, is cleared.
© 2009 Microchip Technology Inc.
DS39778D-page 17