PIC18F67J11-IPT Datasheet, PDF (28/448 Pages) Microchip Technology – 64/80-Pin High-Performance, 1-Mbit Flash Microcontrollers with nanoWatt Technology

PIC18F87J11 FAMILY
TABLE 1-4: PIC18F8XJ1X PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin Number _{Pin Buffer}
80-TQFP ^{Type Type}
Description
PORTF is a bidirectional I/O port.
RF1/AN6/C2OUT
RF1
AN6
C2OUT
23
I/O ST
Digital I/O.
I Analog Analog input 6.
O
—
Comparator 2 output.
RF2/PMA5/AN7/C1OUT
RF2
PMA5
AN7
C1OUT
18
I/O ST
Digital I/O.
O
—
Parallel Master Port address.
I Analog Analog input 7.
O
—
Comparator 1 output.
RF3/AN8/C2INB
RF3
AN8
C2INB
17
I
ST
Digital input.
I Analog Analog input 8.
I Analog Comparator 2 input B.
RF4/AN9/C2INA
RF4
AN9
C2INA
16
I
ST
Digital input.
I Analog Analog input 8.
I Analog Comparator 2 input A.
RF5/PMD2/AN10/
C1INB/CVREF
RF5
PMD2⁽⁷⁾
AN10
C1INB
CVREF
15
I/O ST
I/O TTL
I Analog
I Analog
O Analog
Digital I/O.
Parallel Master Port address.
Analog input 10.
Comparator 1 input B.
Comparator reference voltage output.
RF6/PMD1/AN11/C1INA
RF6
PMD1⁽⁷⁾
AN11
C1INA
14
I/O ST
Digital I/O.
I/O TTL
Parallel Master Port address.
I Analog Analog input 11.
I Analog Comparator 1 input A.
RF7/PMD0/SS1
RF7
PMD0 ⁽⁷⁾
SS1
13
I/O ST
Digital I/O.
I/O TTL
Parallel Master Port address.
I
TTL
SPI slave select input.
Legend: TTL = TTL compatible input
CMOS = CMOS compatible input or output
ST = Schmitt Trigger input with CMOS levels
Analog = Analog input
I = Input
O
= Output
P = Power
OD = Open-Drain (no P diode to VDD)
Note 1: Alternate assignment for ECCP2/P2A when Configuration bit, CCP2MX, is cleared (Extended Microcontroller mode).
2: Default assignment for ECCP2/P2A for all devices in all operating modes (CCP2MX is set).
3: Default assignments for P1B/P1C/P3B/P3C (ECCPMX Configuration bit is set).
4: Alternate assignment for ECCP2/P2A when CCP2MX is cleared (Microcontroller mode).
5: Alternate assignments for P1B/P1C/P3B/P3C (ECCPMX Configuration bit is cleared).
6: Default assignment for PMP data and control pins when PMPMX Configuration bit is set.
7: Alternate assignment for PMP data and control pins when PMPMX Configuration bit is cleared (programmed).
DS39778D-page 28
© 2009 Microchip Technology Inc.