PIC18F67J11-IPT Datasheet, PDF (351/448 Pages) Microchip Technology – 64/80-Pin High-Performance, 1-Mbit Flash Microcontrollers with nanoWatt Technology

PIC18F87J11 FAMILY
DECFSZ
Decrement f, Skip if 0
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
DECFSZ f {,d {,a}}
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
(f) – 1 → dest,
skip if result = 0
None
0010 11da ffff ffff
The contents of register ‘f’ are
decremented. If ‘d’ is ‘0’, the result is
placed in W. If ‘d’ is ‘1’, the result is
placed back in register ‘f’ (default).
If the result is ‘0’, the next instruction
which is already fetched is discarded
and a NOP is executed instead, making
it a two-cycle instruction.
If ‘a’ is ‘0’, the Access Bank is selected.
If ‘a’ is ‘1’, the BSR is used to select the
GPR bank.
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction operates
in Indexed Literal Offset Addressing
mode whenever f ≤ 95 (5Fh). See
Section 25.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
Words:
1
Cycles:
1(2)
Note: 3 cycles if skip and followed
by a 2-word instruction.
Q Cycle Activity:
Q1
Q2
Q3
Q4
Decode
If skip:
Q1
Read
register ‘f’
Q2
Process
Data
Write to
destination
Q3
Q4
No
operation
No
operation
No
operation
If skip and followed by 2-word instruction:
Q1
Q2
Q3
No
operation
Q4
No
operation
No
operation
No
operation
No
operation
No
operation
No
operation
No
operation
No
operation
Example:
HERE
DECFSZ
GOTO
CONTINUE
CNT, 1, 1
LOOP
Before Instruction
PC
=
After Instruction
CNT =
If CNT =
PC =
If CNT ≠
PC =
Address (HERE)
CNT – 1
0;
Address (CONTINUE)
0;
Address (HERE + 2)
© 2009 Microchip Technology Inc.
DCFSNZ
Decrement f, Skip if not 0
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
DCFSNZ f {,d {,a}}
0 ≤ f ≤ 255
d ∈ [0,1]
a ∈ [0,1]
(f) – 1 → dest,
skip if result ≠ 0
None
0100 11da ffff ffff
The contents of register ‘f’ are
decremented. If ‘d’ is ‘0’, the result is
placed in W. If ‘d’ is ‘1’, the result is
placed back in register ‘f’ (default).
If the result is not ‘0’, the next
instruction which is already fetched is
discarded and a NOP is executed
instead, making it a two-cycle
instruction.
If ‘a’ is ‘0’, the Access Bank is selected.
If ‘a’ is ‘1’, the BSR is used to select the
GPR bank.
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction operates
in Indexed Literal Offset Addressing
mode whenever f ≤ 95 (5Fh). See
Section 25.2.3 “Byte-Oriented and
Bit-Oriented Instructions in Indexed
Literal Offset Mode” for details.
Words:
1
Cycles:
1(2)
Note: 3 cycles if skip and followed
by a 2-word instruction.
Q Cycle Activity:
Q1
Q2
Q3
Q4
Decode
If skip:
Q1
No
operation
Read
register ‘f’
Q2
No
operation
Process
Data
Write to
destination
Q3
No
operation
Q4
No
operation
If skip and followed by 2-word instruction:
Q1
Q2
Q3
No
operation
No
operation
No
operation
Q4
No
operation
No
operation
No
operation
No
operation
No
operation
Example:
HERE
ZERO
NZERO
DCFSNZ TEMP, 1, 0
:
:
Before Instruction
TEMP
After Instruction
TEMP
If TEMP
PC
If TEMP
PC
=?
= TEMP – 1,
= 0;
= Address (ZERO)
≠ 0;
= Address (NZERO)
DS39778D-page 351