C868_02 Datasheet, PDF (214/244 Pages) Infineon Technologies AG – 8 - Bit CMOS Microcontroller

C868
Interrupt System
INPH
Capture/Compare Interrupt Node Pointer Register ,High Byte
7
6
5
4
3
2
[Reset value: 39_H]
1
0
-
-
r
r
INPT13
rw
INPT12
rw
INPERR
rw
Field
INPERR
INPT12
INPT13
-
Bits Type Description
[1:0] rw Interrupt Node Pointer for Error Interrupts
This bitfield defines the interrupt node, which is
activated due to a set condition for bit TRPF (if
enabled by bit ENTRPF) or for bit WHE (if enabled by
bit ENWHE).
00 Interrupt node I0 is selected.
01 Interrupt node I1 is selected.
10 Interrupt node I2 is selected.
11 Interrupt node I3 is selected.
[3:2] rw Interrupt Node Pointer for Timer12 Interrupts
This bitfield defines the interrupt node, which is
activated due to a set condition for bit T12OM (if
enabled by bit ENT12OM) or for bit T12PM (if
enabled by bit ENT12PM).
00 Interrupt node I0 is selected.
01 Interrupt node I1 is selected.
10 Interrupt node I2 is selected.
11 Interrupt node I3 is selected.
[5:4] rw Interrupt Node Pointer for Timer13 Interrupt
This bitfield defines the interrupt node, which is
activated due to a set condition for bit T13CM (if
enabled by bit ENT13CM) or for bit T13PM (if
enabled by bit ENT13PM).
00 Interrupt node I0 is selected.
01 Interrupt node I1 is selected.
10 Interrupt node I2 is selected.
11 Interrupt node I3 is selected.
[7:6
r
reserved;
returns ’0’ if read; should be written with ’0’;
User’s Manual
7-30
V 0.4, 2002-01