C868_02 Datasheet, PDF (211/244 Pages) Infineon Technologies AG – 8 - Bit CMOS Microcontroller

C868
Interrupt System
IENH
Capture/Compare Interrupt Enable Register ,High Byte
7
6
5
4
3
2
[Reset value: 00_H]
1
0
-
ENIDLE ENWHE ENCHE
-
ENTRPF ENT13PM ENT13CM
r
rw
rw
rw
r
rw
rw
rw
Field
ENT13CM
ENT13PM
ENTRPF
ENCHE
Bits Type Description
0
rw Enable Interrupt for T13 Compare-Match
0 No interrupt will be generated if the set
condition for bit T13CM in register IS occurs.
1 An interrupt will be generated if the set
condition for bit T13CM in register IS occurs.
The interrupt line, which will be activated is
selected by bitfield INPT13.
1
rw Enable Interrupt for T13 Period-Match
0 No interrupt will be generated if the set
condition for bit T13PM in register IS occurs.
1 An interrupt will be generated if the set
condition for bit T13PM in register IS occurs.
The interrupt line, which will be activated is
selected by bitfield INPT13.
2
rw Enable Interrupt for Trap Flag
0 No interrupt will be generated if the set
condition for bit TRPF in register IS occurs.
1 An interrupt will be generated if the set
condition for bit TRPF in register IS occurs.
The interrupt line, which will be activated is
selected by bitfield INPERR.
4
rw Enable Interrupt for Correct Hall Event
0 No interrupt will be generated if the set
condition for bit CHE in register IS occurs.
1 An interrupt will be generated if the set
condition for bit CHE in register IS occurs. The
interrupt line, which will be activated is
selected by bitfield INPCHE.
User’s Manual
7-27
V 0.4, 2002-01