C868_02 Datasheet, PDF (206/244 Pages) Infineon Technologies AG – 8 - Bit CMOS Microcontroller

C868
Interrupt System
ISSH
Capture/Compare Interrupt Status Reset Register ,High Byte
7
6
5
4
3
2
[Reset value: 00_H]
1
0
-
SIDLE SWHE SCHE
-
STRPF ST13PM ST13CM
r
w
w
w
r
w
w
w
Field
ST13CM
ST13PM
STRPF
SCHE
SWHE
SIDLE
0
Bits Type Description
0
w Set Timer T13 Compare-Match Flag
0 No action
1 Bit T13CM in register IS will be set.
1
w Set Timer T13 Period-Match Flag
0 No action
1 Bit T13PM in register IS will be set.
2
w Set Trap Flag
0 No action
1 Bit TRPF in register IS will be set (not taken
into account while input CTRAP=’0’ and
TRPPEN=’1’.
3
w Set Correct Hall Event Flag
0 No action
1 Bit CHE in register IS will be set.
5
w Set Wrong Hall Event Flag
0 No action
1 Bit WHE in register IS will be set.
6
w Set IDLE Flag
0 No action
1 Bit IDLE in register IS will be set.
3, 7 r
reserved;
returns ’0’ if read; should be written with ’0’;
Note: If the setting by HW of the corresponding flags can lead to an interrupt, the setting
by SW has the same effect.
User’s Manual
7-22
V 0.4, 2002-01