C868_02 Datasheet, PDF (108/244 Pages) Infineon Technologies AG – 8 - Bit CMOS Microcontroller

C868
On-Chip Peripheral Components
Register T12DTC controls the dead-time generation for the timer T12 compare
channels. Each channel can be independently enabled/disabled for dead-time
generation. If enabled, the transition from passive state to active state is delayed by the
value defined by bit field DTM. The dead-time counter can only be reloaded while it is
zero.
T12DTCL
Timer T12 Dead-Time Control Register,Low Byte
7
6
5
4
3
2
-
-
r
r
DTM
rw
[Reset value: 00_H]
1
0
Field
DTM
-
Bits Typ Description
[5:0] rw Dead-Time
Bit field DTM determines the programmable delay
between switching from the passive state to the
active state of the selected outputs. The switching
from the active state to the passive state is not
delayed.
[7:6] r
reserved;
returns ’0’ if read; should be written with ’0’;
User’s Manual
4-64
V 0.4, 2002-01