C868_02 Datasheet, PDF (129/244 Pages) Infineon Technologies AG – 8 - Bit CMOS Microcontroller

Field
TRPM2
-
C868
On-Chip Peripheral Components
Bits Type Description
2
rw Trap Mode Control Bit 2
0 The trap state can be left (return to normal
operation = bit TRPS=’0’) as soon as the input
CTRAP becomes inactive. Bit TRPF is
automatically cleared by HW if the input pin
CTRAP becomes ’1’. Bit TRPS is
automatically cleared by HW if bit TRPF is ’0’
and if the synchronization condition (according
to TRPM0,1) is detected.
1 The trap state can be left (return to normal
operation = bit TRPS=’0’) as soon as bit TRPF
is reset by SW after the input CTRAP becomes
inactive (TRPF is not cleared by HW). Bit
TRPS is automatically cleared by HW if bit
TRPF=’0’ and if the synchronization condition
(according to TRPM0,1) is detected.
[7:3] r
reserved;
returns ’0’ if read; should be written with ’0’;
User’s Manual
4-85
V 0.4, 2002-01