C868_02 Datasheet, PDF (115/244 Pages) Infineon Technologies AG – 8 - Bit CMOS Microcontroller

C868
On-Chip Peripheral Components
Field
CC60PS
CC61PS
CC62PS
COUT60PS
COUT61PS
COUT62PS
COUT63PS
1)
T13IM²⁾
Bits Typ Description
0
rwh Passive State Select for Compare Outputs
2
Bits CC6xPS, COUT6xPS select the state of the
4
corresponding compare channel, which is
1
considered to be the passive state. During the
3
passive state, the passive level (defined in register
5
PSLR) is driven by the output pin. Bits CC6xPS,
6
COUT6xPS (x=0, 1, 2) are related to T12, bit
CC63PS is related to T13.
0 The corresponding compare output drives
passive level while CC6xST is ’0’.
1 The corresponding compare output drives
passive level while CC6xST is ’1’.
In capture mode, these bits are not used.
7
rwh T13 Inverted Modulation
Bit T13IM inverts the T13 signal for the modulation of
the CC6x and COUT6x (x = 0, 1, 2) signals.
0 T13 output is not inverted.
1 T13 output is inverted for further modulation.
1) _{These bits have shadow bits and are updated in parallel to the capture/compare registers of T12, T13}
respectively. A read action targets the actually used values, whereas a write action targets the shadow bits.
2) _{This bit has a shadow bit and is updated in parallel to the compare and period registers of T13. A read action}
targets the actually used values, whereas a write action targets the shadow bit.
User’s Manual
4-71
V 0.4, 2002-01