C868_02 Datasheet, PDF (130/244 Pages) Infineon Technologies AG – 8 - Bit CMOS Microcontroller

C868
On-Chip Peripheral Components
TRPCTRH
Trap Control Register ,High Byte
7
6
5
4
TRPPEN TRPEN13
rw
rw
3
2
TRPEN
rw
[Reset value: 00_H]
1
0
Field
TRPEN
TRPEN13
TRPPEN
Bits Type Description
[5:0] rw
Trap Enable Control
Setting these bits enables the trap functionality for
the following corresponding output signals:
bit 0 trap functionality of CC60
bit 1 trap functionality of COUT60
bit 2 trap functionality of CC61
bit 3 trap functionality of COUT61
bit 4 trap functionality of CC62
bit 5 trap functionality of COUT62
The enable feature of the trap functionality is defined
as follows:
0 The trap functionality of the corresponding
output signal is disabled. The output state is
independent from bit TRPS.
1 The trap functionality of the corresponding
output signal is enabled. The output is set to
the passive state while TRPS=’1’.
6
rw Trap Enable Control for Timer T13
0 The trap functionality for T13 is disabled.
Timer T13 (if selected and enabled) provides
PWM functionality even while TRPS=’1’.
1 The trap functionality for T13 is enabled. The
timer T13 PWM output signal is set to the
passive state while TRPS=’1’.
7
rw Trap Pin Enable
0 The trap functionality based on the input pin
CTRAP is disabled. A trap can only be
generated by SW by setting bit TRPF.
1 The trap functionality based on the input pin
CTRAP is enabled. A trap can be generated by
SW by setting bit TRPF or by CTRAP=’0’.
User’s Manual
4-86
V 0.4, 2002-01