C868_02 Datasheet, PDF (203/244 Pages) Infineon Technologies AG – 8 - Bit CMOS Microcontroller

C868
Interrupt System
ISH
Capture/Compare Interrupt Register ,High Byte
7
6
5
4
3
-
IDLE
WHE
CHE
TRPS
r
rh
rh
rh
rh
2
TRPF
rh
[Reset value: 00_H]
1
0
T13PM
rh
T13CM
rh
Field
T13CM
T13PM
TRPF
TRPS¹⁾
Bits Type Description
0
rh Timer T13 Compare-Match Flag
0 A timer T13 compare-match has not yet been
detected since this bit has been reset for the
last time.
1 A timer T13 compare-match has been
detected.
1
rh Timer T13 Period-Match Flag
0 A timer T13 period-match has not yet been
detected since this bit has been reset for the
last time.
1 A timer T13 period-match has been detected.
2
rh Trap Flag
The trap flag TRPF will be set by HW if TRPPEN=’1’
and CTRAP=’0’ or by SW. If TRPM2=’0’, bit TRPF is
reset by HW if the input CTRAP becomes inactive
(TRPPEN=’1’). If TRPM2=’1’, bit TRPF has to be
reset by SW in order to leave the trap state.
0 The trap condition has not been detected.
1 The trap condition has been detected (input
CTRAP has been ’0’ or by SW).
3
rh Trap State
0 The trap state is not active.
1 The trap state is active. Bit TRPS is set while
bit TRPF=’1’. It is reset according to the mode
selected in register TRPCTR.
User’s Manual
7-19
V 0.4, 2002-01