ZAMC4100 Datasheet, PDF (21/155 Pages) Integrated Device Technology – Actuator and Motor Controller

ZAMC4100 Datasheet
Parameter
Symbol
Min. Typ. Max.
EC Driver
Transition time ^{5), 2)}
tS_EC
4
5
10
1) The time between driver enable/disable and reaching 10% of the reaction at the output.
2) Parameter guaranteed by process monitoring but not tested during production.
3) Accumulative time for over-current event. After this period, the driver is automatically switched off (see sections 3.8.2 and 3.9.2).
4) Between 10% and 90% of the output voltage swing.
5) After DAC code switching from 0 to 31 for the range of 10% to 90% at the output reaction.
Unit
µs
1.2.5. Internal Reference Sources and Sensors
Table 1.11 Internal Die Temperature Sensor
Parameter
Voltage/Temperature Slope ¹⁾
Symbol
SVT
Output Voltage (at 27°C)
Vt27
1) Parameter guaranteed by process monitoring but not tested during production.
Table 1.12 Internal Reference Sources
Parameter
Symbol
Reference voltage
Reference voltage accuracy ¹⁾
VREF
dVREF
Reference current (at 27°C after trimming)
Reference current temperature drift ¹⁾
IREF
dIREF
1) Parameter guaranteed by process monitoring but not tested during production.
Min.
1.76
0.52
Typ.
1.80
0.54
Max.
1.84
0.56
Unit
mV/°C
V
Min. Typ. Max.
Unit
-
2.4
-
V
-2
-
2
%
9.7
10
10.3
µA
-3
-
3
%
© 2016 Integrated Device Technology, Inc.
21
January 26, 2016