ZAMC4100 Datasheet, PDF (1/155 Pages) Integrated Device Technology – Actuator and Motor Controller

Actuator and Motor Controller
ZAMC4100
Datasheet
Brief Description
The ZAMC4100 Actuator and Motor Controller is an
integrated, single package solution that features a
high-performance ARM^® Cortex™-M0* microcon-
troller (MCU), a 10-bit ADC, four general purpose
analog inputs, four half-bridge drivers, four high-side
switches, one output buffer for electrochromatic (EC)
mirror control with programmable output voltage (6
bit DAC), current source for external diode-based
temperature measurements, switchable voltage
source for external resistive sensors, and LIN (Local
Interconnect Network) bus interface.
This single-package solution with its rich diagnostic
features, optimized thermal performance, and LIN
bus interface, is well suited for automotive applica-
tions, such as high-end automotive exterior mirror
controllers, where small form-factor circuit board
designs and light wiring harnesses are required.
Features
• Two main operation modes
§ NORMAL Mode with all functionality
available
§ SLEEP Mode with very low current
consumption (less than 80µA)
• 10-bit ADC for measuring various parameters
• 4 general purpose ADC inputs configurable for
absolute or ratiometric mode
• 4 low RDS (ON) half-bridge drivers and 4 low
RDS (ON) high-side switches
• Analog EC mirror output controlled via 6-bit DAC
• All outputs short circuit protected
• Hardware 8-bit PWM control for half-bridge and
high-side drivers
• Over-temperature protection with automatic
driver shut-down
• Over-voltage and under-voltage detection with
automatic driver shut-down
• Overload and open/short diagnostic for all
outputs
• Embedded LIN 2.2/SAE J2602-2 transceiver
• Embedded ARM^® Cortex™-M0 microcontroller
• 8 user-configurable GPIO pins
© 2016 Integrated Device Technology, Inc.
Benefits
• Multi-chip-module concept with high functional
integrity
• Low number of external components
• Small footprint plastic QFN package with
exposed pad allowing better thermal
management
• AEC-Q100 qualified product, optimized for
automotive environment
• Smart power management concept for achieving
low sleep current consumption (<80µA)
Available Support
• Data sheet and application notes
• Evaluation and Application Kits
• Software Development Kit (SDK)
Physical Characteristics
• Ambient operation temperature: -40°C to +85°C
• Wide power supply voltage range: 6V to 18V
• Plastic QFN64 9x9mm package; exposed die pad
ZAMC4100
PQFN64 TOP VIEW
HB2a 1
VSS3 2
HB1b 3
VDDE2 4
VDDE3 5
HS1a 6
VDDE4 7
VDDE5 8
HS2 9
HS1b 10
VDDE6 11
VDDE7 12
HB1a 13
HS3 14
VSS2 15
HB2b ₁₆
EXPOSED PAD
(pin 65)
48 TCK
47 TMS
46 TDO
45 TDI
44 GPIO0
43 GPIO1
42 GPIO2
41 GPIO3
40 GPIO4
39 GPIO5
38 GPIO6
37 GPIO7
36 n.c.
35 CAP_MCU
34 CAP_3V3
33 CAP_1V8
* Note: The ARM® and Cortex™ trademarks are owned by ARM, Ltd.
1
January 26, 2016