ZAMC4100 Datasheet, PDF (135/155 Pages) Integrated Device Technology – Actuator and Motor Controller

ZAMC4100 Datasheet
Table 4.29 Register [0x4000_1810] Z1_LINBAUDLOW
Z1_LINBAUDLOW
ADD:0x4000_1810
Bit
Name
Ext.
Int. Reset
Access Access Value
Description
7 : 0 LINBAUDLOW R / W
R/W
0xE7
Baud rate for LIN interface
baud rate = CLK/({LINBAUDHIGH, LINBAUDLOW} + 1)
Note: In NORMAL operating mode, this register must not be
written. It is updated by the BREAK/SYNC detector.
Note: For debugging purposes, the LIN controller can function
as a TX UART. For this purpose, the baud rate can be selected
by software but must be at least 0x3.
31 : 8
---
R
---
0 Unused; always read as 0.
Table 4.30 Register [0x4000_1814] Z1_LINBAUDHIGH
Z1_LINBAUDHIGH
ADD:0x4000_1814
Bit
Name
Ext.
Int. Reset
Access Access Value
Description
6 : 0 LINBAUDHIGH R / W
R/W
0x3 Baud rate for LIN interface
baud rate = clk / ( {LINBAUDHIGH, LINBAUD LOW} + 1)
Note: In NORMAL operating mode, this register must not be
written. It is updated by the BREAK/SYNC detector.
Note: for debugging purposes, the LIN controller can function as
a TX UART. For this purpose, the baud rate can be selected by
software but must be at least 0x3.
31 : 7
---
R
---
0 Unused; always read as 0.
© 2016 Integrated Device Technology, Inc.
135
January 26, 2016