MC68HC08GZ32 Datasheet, PDF (74/320 Pages) Freescale Semiconductor, Inc – Microcontrollers

Mask Options
The system stabilization time for power-on reset and long stop recovery (both 4096 CGMXCLK cycles)
gives a delay longer than the LVI enable time for these startup scenarios. There is no period where the
MCU is not protected from a low-power condition. However, when using the short stop recovery option,
the 32-CGMXCLK delay must be greater than the LVI’s turn on time to avoid a period in startup where
the LVI is not protecting the MCU.
STOP — STOP Instruction Enable Bit
STOP enables the STOP instruction.
1 = STOP instruction enabled
0 = STOP instruction treated as illegal opcode
COPD — COP Disable Bit
COPD disables the COP module. See Chapter 6 Computer Operating Properly (COP) Module.
1 = COP module disabled
0 = COP module enabled
MC68HC08GZ32 Data Sheet, Rev. 3
74
Freescale Semiconductor