MC68HC08GZ32 Datasheet, PDF (191/320 Pages) Freescale Semiconductor, Inc – Microcontrollers

I/O Registers
SCP1 and SCP0 — ESCI Baud Rate Register Prescaler Bits
These read/write bits select the baud rate register prescaler divisor as shown in Table 14-7. Reset
clears SCP1 and SCP0.
Table 14-7. ESCI Baud Rate Prescaling
SCP[1:0]
00
01
10
11
Baud Rate Register
Prescaler Divisor (BPD)
1
3
4
13
SCR2–SCR0 — ESCI Baud Rate Select Bits
These read/write bits select the ESCI baud rate divisor as shown in Table 14-8. Reset clears
SCR2–SCR0.
Table 14-8. ESCI Baud Rate Selection
SCR[2:1:0]
000
001
010
011
100
101
110
111
Baud Rate Divisor (BD)
1
2
4
8
16
32
64
128
14.8.8 ESCI Prescaler Register
The ESCI prescaler register (SCPSC) together with the ESCI baud rate register selects the baud rate for
both the receiver and the transmitter.
NOTE
There are two prescalers available to adjust the baud rate. One in the ESCI
baud rate register and one in the ESCI prescaler register.
Address:
Read:
Write:
Reset:
$0009
Bit 7
6
5
4
3
2
1
PDS2
PDS1
PDS0 PSSB4 PSSB3 PSSB2 PSSB1
0
0
0
0
0
0
0
Figure 14-18. ESCI Prescaler Register (SCPSC)
Bit 0
PSSB0
0
MC68HC08GZ32 Data Sheet, Rev. 3
Freescale Semiconductor
191