MC68HC08GZ32 Datasheet, PDF (154/320 Pages) Freescale Semiconductor, Inc – Microcontrollers

Input/Output (I/O) Ports
13.4.2 Data Direction Register B
Data direction register B (DDRB) determines whether each port B pin is an input or an output. Writing a
1 to a DDRB bit enables the output buffer for the corresponding port B pin; a 0 disables the output buffer.
Address:
Read:
Write:
Reset:
$0005
Bit 7
6
5
4
3
2
1
DDRB7 DDRB6 DDRB5 DDRB4 DDRB3 DDRB2 DDRB1
0
0
0
0
0
0
0
Figure 13-7. Data Direction Register B (DDRB)
Bit 0
DDRB0
0
DDRB7–DDRB0 — Data Direction Register B Bits
These read/write bits control port B data direction. Reset clears DDRB7–DDRB0, configuring all port B
pins as inputs.
1 = Corresponding port B pin configured as output
0 = Corresponding port B pin configured as input
NOTE
Avoid glitches on port B pins by writing to the port B data register before
changing data direction register B bits from 0 to 1.
Figure 13-8 shows the port B I/O logic.
When bit DDRBx is a 1, reading address $0001 reads the PTBx data latch. When bit DDRBx is a 0,
reading address $0001 reads the voltage level on the pin. The data latch can always be written,
regardless of the state of its data direction bit. Table 13-3 summarizes the operation of the port B pins.
READ DDRB ($0005)
WRITE DDRB ($0005)
RESET
WRITE PTB ($0001)
DDRBx
PTBx
PTBx
READ PTB ($0001)
Figure 13-8. Port B I/O Circuit
Table 13-3. Port B Pin Functions
DDRB PTB
Bit
Bit
0
X⁽¹⁾
1
X
I/O Pin
Mode
Input, Hi-Z⁽²⁾
Output
Accesses
to DDRB
Read/Write
DDRB7–DDRB0
DDRB7–DDRB0
1. X = Don’t care
2. Hi-Z = High impedance
3. Writing affects data register, but does not affect input.
Accesses
to PTB
Read
Write
Pin
PTB7–PTB0⁽³⁾
PTB7–PTB0
PTB7–PTB0
MC68HC08GZ32 Data Sheet, Rev. 3
154
Freescale Semiconductor