MC68HC08GZ32 Datasheet, PDF (265/320 Pages) Freescale Semiconductor, Inc – Microcontrollers

Functional Description
NOTE
In PWM signal generation, do not program the PWM channel to toggle on
output compare. Toggling on output compare prevents reliable 0% duty
cycle generation and removes the ability of the channel to self-correct in the
event of software error or noise. Toggling on output compare also can
cause incorrect PWM signal generation when changing the PWM pulse
width to a new, much larger value.
19.3.4.2 Buffered PWM Signal Generation
Channels 0 and 1 can be linked to form a buffered PWM channel whose output appears on the T2CH0
pin. The TIM2 channel registers of the linked pair alternately control the pulse width of the output.
Setting the MS0B bit in TIM2 channel 0 status and control register (T2SC0) links channel 0 and channel 1.
The TIM2 channel 0 registers initially control the pulse width on the T2CH0 pin. Writing to the TIM2
channel 1 registers enables the TIM2 channel 1 registers to synchronously control the pulse width at the
beginning of the next PWM period. At each subsequent overflow, the TIM2 channel registers (0 or 1) that
control the pulse width are the ones written to last. T2SC0 controls and monitors the buffered PWM
function, and TIM2 channel 1 status and control register (T2SC1) is unused. While the MS0B bit is set,
the channel 1 pin, T2CH1, is available as a general-purpose I/O pin.
Channels 2 and 3 can be linked to form a buffered PWM channel whose output appears on the T2CH2
pin. The TIM2 channel registers of the linked pair alternately control the pulse width of the output.
Setting the MS2B bit in TIM2 channel 2 status and control register (T2SC2) links channel 2 and channel 3.
The TIM2 channel 2 registers initially control the pulse width on the T2CH2 pin. Writing to the TIM2
channel 3 registers enables the TIM2 channel 3 registers to synchronously control the pulse width at the
beginning of the next PWM period. At each subsequent overflow, the TIM2 channel registers (2 or 3) that
control the pulse width are the ones written to last. T2SC2 controls and monitors the buffered PWM
function, and TIM2 channel 3 status and control register (T2SC3) is unused. While the MS2B bit is set,
the channel 3 pin, T2CH3, is available as a general-purpose I/O pin.
Channels 4 and 5 can be linked to form a buffered PWM channel whose output appears on the T2CH4
pin. The TIM2 channel registers of the linked pair alternately control the pulse width of the output.
Setting the MS4B bit in TIM2 channel 4 status and control register (T2SC4) links channel 4 and channel 5.
The TIM2 channel 4 registers initially control the pulse width on the T2CH4 pin. Writing to the TIM2
channel 5 registers enables the TIM2 channel 5 registers to synchronously control the pulse width at the
beginning of the next PWM period. At each subsequent overflow, the TIM2 channel registers (4 or 5) that
control the pulse width are the ones written to last. T2SC4 controls and monitors the buffered PWM
function, and TIM2 channel 5 status and control register (T2SC5) is unused. While the MS4B bit is set,
the channel 5 pin, T2CH5, is available as a general-purpose I/O pin.
NOTE
In buffered PWM signal generation, do not write pulse width values to the
currently active channel registers. User software should track the currently
active channel to prevent writing a new value to the active channel. Writing
to the active channel registers is the same as generating unbuffered PWM
signals.
MC68HC08GZ32 Data Sheet, Rev. 3
Freescale Semiconductor
265