EP2SGX30C Datasheet, PDF (169/314 Pages) Altera Corporation – Stratix II GX Device

Configuration & Testing
Referenced
Documents
This chapter references the following documents:
■ AN 357: Error Detection Using CRC in Altera FPGA Devices
■ AN 414: An Embedded Solution for PLD JTAG Configuration
■ AN 418 SRunner: An Embedded Solution for Serial Configuration Device
Programming
■ Configuring Stratix II & Stratix II GX Devices chapter in volume 2 of
the Stratix II GX Device Handbook
■ Configuring the MicroBlaster Fast Passive Parallel Software Driver White
Paper
■ Configuring the MicroBlaster Passive Serial Software Driver White Paper
■ MorphIO: An I/O Reconfiguration Solution for Altera Devices White
Paper
■ PLLs in Stratix II & Stratix II GX Devices chapter in volume 2 of the
Stratix II GX Device Handbook
■ Remote System Upgrades with Stratix II & Stratix II GX Devices chapter
in volume 2 of the Stratix II GX Device Handbook
■ Serial Configuration Devices (EPCS1, EPCS4, EPCS64, and EPCS128)
Data Sheet in the Configuration Handbook
■ Stratix II GX Architecture chapter in volume 1 of the Stratix II GX
Device Handbook.
Document
Table 3–6 shows the revision history for this chapter.
Revision History
Table 3–6. Document Revision History
Date and
Document
Version
October 2007
v1.4
August 2007
v1.3
May 2007
v1.2
February 2007
v1.1
October 2005
v1.0
Changes Made
Summary of Changes
Minor text edits.
—
Updated the note in the “IEEE Std. 1149.1 JTAG
—
Boundary-Scan Support”
Updated Table 3–3.
—
Added the “Referenced Documents” section.
—
Updated the “Temperature Sensing Diode
—
(TSD)” section.
Added the “Document Revision History” section Added support information for the
to this chapter.
Stratix II GX device.
Added chapter to the Stratix II GX Device
—
Handbook.
Altera Corporation
October 2007
3–13
Stratix II GX Device Handbook, Volume 1